Zenith-data-systems MT2000 Manual de usuario descargar pdf (Pagina 37)

2-23

Features

Removable Media Drive Bays

On the left side of the system above the diskette drive,

three 5 1/4-inch half-height bays (see Figure 2-6) are

designed for peripherals with removable media

(diskette, CD-ROM, tape cartridge). Any two adjacent

5 1/4-inch bays can be converted to a single full-height

bay. The 5 1/4-inch drives can be removed directly from

the front of the chassis after the 5 1/4-inch plastic

frame is removed. The bezel is retained by a thumb

screw and snap features and is accessible when the left

side panel and top panel are removed. Cosmetic filler

panels and metal EMI shields are installed over all

unused 5 1/4-inch bays.

On the left side of the system below the 5 1/4-inch

removable media drive bays, two built-in 3 1/2-inch

bays one of which contains a 3 1/2-inch diskette drive

that supports both 720 KB and 1.44 MB media (see

Figure 2-6).

Figure 2-6. Removable Media Drive Bays

Factory-installed CD-ROM reader

plus two bays for removable media

drives.

Factory-installed 3 1/2-inch diskette

drive plus second bay for removable

3 1/2-inch drive.

(Exterior door shown open)

Note: The SCSI termination resistors must be installed

in the last SCSI drive of the daisy chain cabling (top

media bay). All other devices must have terminators

removed.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 204 205

Sin comentarios

Zenith-data-systems MT2000 Manual de usuario Pagina 37